Siemens · Variable Frequency Drives
SINAMICS S220
Model-level Siemens SINAMICS variable-frequency-drive reference for current V, G and S platforms and representative 6SL order numbers.
This page is informational and does not build an order number online. Confirm the final configuration against the complete Siemens designation and manufacturer documentation.
- Brand
- Siemens
- Category
- Variable Frequency Drives
SERIES OVERVIEW
Primary identification parameters
- Category
- 新一代高性能
- Series
- SINAMICS S220
- 当前功率范围
- Booksize至110kW; Chassis至900kW; 并联至6984kW
- Voltage range
- 当前主线400V级, 持续扩展
- 结构/防护
- Booksize/Chassis/Cabinet
- 控制/电机
- 高动态单/多轴
- Communication / safety
- CU320-3, TIA/Startdrive; 高级安全
- Typical applications
- 高性能机器 and 大型过程
TECHNICAL DATA · 3 ROWS
高性能模块化单轴/多轴驱动系统
S220在2025–2026持续扩展; S120仍为成熟平台.
| 平台 | Construction | Power range | 控制/轴数 | 供电/回馈 | Typical applications |
|---|---|---|---|---|---|
| S220 | Booksize | 至110kW | CU320-3, 最多约12轴等级 | SLM/ALM公共直流母线 | 高动态机器 |
| S220 | Chassis | 至900kW | 高性能单/多轴 | Active Line / Motor / Universal Modules | 大型过程 and 运动 |
| S220 | Parallel/Cabinet | 至6984kW | 项目化 | 并联 and 柜式系统 | 超大功率低压驱动 |
TECHNICAL DATA · 11 ROWS
Siemens SiePortal代表性6SL订货号
用于理解LO/HO, 滤波 and 结构代码, 不等于全部型号清单.
| Series | 订货号 | 官方页面额定 | 电压/结构 | Notes |
|---|---|---|---|---|
| V20 | 6SL3210-5BE22-2UV0 | 2.2kW, 150%过载60s | 3AC 380–480V, IP20 | 基础variable frequency drive示例 |
| G120C | 6SL3210-1KE18-8AF1 | 4.0kW低过载 / 3.0kW高过载 | 3AC 380–480V, FSA | LO/HO差异示例 |
| G120C | 6SL3210-1KE21-7AF1 | 7.5kW低过载 / 5.5kW高过载 | 3AC 380–480V | 当前页面标示Active |
| G120C | 6SL3210-1KE23-8AF1 | 18.5kW低过载 / 15kW高过载 | 3AC 380–480V, FSC | 紧凑型大功率示例 |
| G120C | 6SL3210-1KE31-7UF1 | 90kW额定（页面过载条件） | 3AC 380–480V | 当前页面标示Active |
| G120X | 6SL3220-3YE18-0AP0 | 3kW, 110% 60s负载 | 3AC 380–480V | pumpfan基础设施型号示例 |
| G115D | 6SL3521-1XE01-5AB0 | 1.5kW, 200% 3s /150% 57s | 墙装, 3AC 380–480V | 分布式驱动示例 |
| G115D | 6SL3520-2XD04-0AF0 | 4kW, 200% 3s /150% 57s | 墙装, 3AC 380–480V | 4kW分布式型号示例 |
| G220 Clean Power | 6SL4113-2JP17-2BF0 | 11kW低过载 /7.5kW高过载 | 3AC 380–500V | 低谐波型号示例 |
| G220 Clean Power | 6SL4113-2DA18-2FF0 | 15kW低过载 /11kW高过载 | 3AC 380–500V | 另一结构/选件代码示例 |
| G220 | 6SL4113-0CA18-0BF0 | 15kW低过载 /11kW高过载 | 3AC 380–500V, FSC | 标准型与Clean Power型号不可混用 |
TECHNICAL DATA · 2 ROWS
SINAMICS通信, 安全, 控制 and 功率附件
完整BOM需核对系列, 控制单元, 固件, 额定电流 and 认证.
| Category | 产品/选件 | 功能 | 适用平台 | 关键注意 |
|---|---|---|---|---|
| 高性能控制 | CU320-2 / CU320-3 | 多轴 and 高性能控制 | S120/S220 | DRIVE-CLiQ拓扑, 轴数 and 许可证 |
| 工程软件 | SINAMICS Startdrive | TIA Portal内配置, 调试 and 数字孪生 | G120/G200/G210/G220/S220等 | TIA/Startdrive版本 and 固件需匹配 |
TECHNICAL DATA · 1 ROWS
SINAMICS型号, 负载 and MLFB代码说明
6SL订货号必须通过SiePortal/TIA Selection Tool核对.
| 字段/概念 | Example | Meaning | 不能忽略 |
|---|---|---|---|
| 系列代码 | G120C / G220 / S220 | 性能 and 架构平台 | 同kW系列的功能, 尺寸 and 价格差异大 |
TECHNICAL DATA · 1 ROWS
SINAMICSvariable frequency drive正式询价配置清单
至少确认25项, 尤其是电流, LO/HO, 通信, 安全 and 制动.
| No. | 配置项 | 必须提供 | Example | 风险 | 建议写法 |
|---|---|---|---|---|---|
| Modular S120/S220 | Siemens SINAMICS S120 / S220 Drive System Line supply and DC-link architecture: __________ Number of axes and motor data: __________ Line Module / Motor Module power: __________ Control Unit: CU320-2 / CU320-3 / other DRIVE-CLiQ topology: Attached Regenerative operation: Required / Not required Safety functions and encoders: __________ Communication / motion controller: __________ Cooling / cabinet / IP rating: __________ Software and TIA Portal version: __________ Quantity: ___ system(s) |
Need help confirming the complete Siemens designation?
The internal inquiry form carries Siemens, category, series and key parameters automatically.